No overselling, no guesswork — just a Hvac crew that diagnoses it right the first time. Same-day appointments available across Hunter and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the company that tells you what actually needs fixing instead of what pads the ticket. We carry the credentials Hunter inspectors and property managers expect to see, and we keep that documentation available on request for every job, residential or commercial.
Hunter's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Hunter and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Hunter is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. We keep parts inventory stocked based on what actually fails most often on Hunter's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Hunter dispatch team moves emergency tickets to the front of the schedule so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Hunter get resolved in a single trip, not a multi-day back-and-forth.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Hunter homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services light industrial and warehouse ventilation across Hunter, with priority response for facilities that can't afford downtime.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Hunter households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Hunter technician on our team is held to.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
We quote a flat rate before work begins and that number doesn't change once you approve it.
Our office follows up after major repairs and installs to confirm everything is holding.
A little attention to how your system is running can save you a lot of money and discomfort.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
This is one of the most common complaints we hear on service calls across Hunter.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
We explain what failed, why it failed, and what the options are.
Maintenance plan members get priority scheduling and discounted rates.
We don't write these — our customers do.
"The furnace stopped working overnight and someone was at our door before 9am. The pricing was exactly what they quoted over the phone."
"Signed up for the annual plan after our first repair and it's paid for itself already. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Documentation for our records was thorough and easy to file."
"The estimate matched the final invoice exactly, down to the dollar. Would use them again without hesitation."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
After thousands of service calls across Hunter, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Clearing debris, leaves, and overgrown landscaping away from an outdoor condenser unit gives it room to breathe and keeps it running efficiently. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Handles the majority of Hunter installs and specializes in properly sizing equipment for older housing stock.
Keeps the emergency truck stocked based on what actually fails most often locally.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Every technician we send is licensed in accordance with Hunter, NY requirements and carries full liability coverage.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
Ask about current after-hours rates when you call +1-866-805-8548.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Housing stock varies a lot across Hunter — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Hunter.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Hunter installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Hunter, NY and near Hunter, there's a strong chance we already service your street.
Property managers with multiple Hunter addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
